2024
Speiser, K., Maciocci, G., Teizer, J. (2024). “Risk Assessment for Construction Safety with Retrieval-augmented Generation and Agentic Artificial Intelligence”. CONVR 2024, Sydney, Australia, November 4-6, 2024.
Wolf, M., Teizer, J., Jürgens, N. (2024). “2.5D Platformer Serious Game for Low-threshold Construction Safety Training”. CONVR 2024, Sydney, Australia, November 4-6, 2024.
Speiser, K., Teizer, J., Ali, G.M. (2024). “Smart signalperson for safe tower crane operations on a future digital construction site.” CIBW099W123, Kumasi, Ghana, October 8-11, 2024, 353-365, ISBN: 9789988391386.
Teizer, J., Wolf, M., Radu, M.-A., Golovina, O. (2024). “Determining the potential relationship between poor construction safety behavior and children’s education: over five decades of graphic safety behavior depictions.” CIBW099W123, Kumasi, Ghana, October 8-11, 2024, 491-501, ISBN: 9789988391386.
Johansen, K.W., Teizer, J. (2024). “Digital Twin for Construction Safety Modules in the Plan-Do-Check-Act Cycle of Events and Information Exchange.” Proceedings of the 41st International Conference of CIB W78, Marrakech, Morocco, ISSN: 2706-6568. (ISSN: 2706-6568), http://itc.scix.net/paper/w78-2024-130
Speiser, K., Teizer, J. (2024). “Retrieval-augmented generative language model for construction safety knowledge.” Georg Nemetschek Institute (GNI) Symposium & Expo on Artificial Intelligence for the Built World, Technical University of Munich, September 10-12, 2024.
Hong, K., Apostolidis, A., Teizer, J. (2024). “Discrete Event Simulation to Predict Construction Equipment Emissions on a Digital Twin Platform.” 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France, 267-274, https://doi.org/10.22260/ISARC2024/0036
Avi Raj, A., Teizer, J. (2024). “State of the Art Review of Technological Advancements for Safe Tower Crane Operation.” 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France, 364-373, https://doi.org/10.22260/ISARC2024/0048
Hong, K., Teizer, J. (2024). “Automated Construction Site Safety Monitoring Using Preidentified Static and Dynamic Hazard Zones.” 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France, 388-395, https://doi.org/10.22260/ISARC2024/0051
Speiser, K., Teizer, J. (2024). “Worker-Centric Path Planning: Simulating Hazardous Energy to Control Construction Safety Using Graph Theory.” 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France, 505-512, https://doi.org/10.22260/ISARC2024/0066
Bharathi, V.V., Prieto, S., Garcia de Soto, B., Teizer, J. (2024). “Automating Construction Safety Inspections using Robots and Unsupervised Deep Domain Adaptation by Backpropagation.” 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France, 855-862, https://doi.org/10.22260/ISARC2024/0111
2023
Wolf, M., Teizer, J. (2023). “Creation and acceptance of low-threshold mobile training on sustainability in construction.” 23rd Conference on Construction Application of Virtual Reality (CONVR), 34-45, Florence, Italy, https://doi.org/10.36253/979-12-215-0289-3.04
Speiser, K., Hong, K., Teizer, J. (2023). “Enhancing the realism of virtual construction safety training: Integration of real-time location systems for real-world hazard simulations.” 23rd Conference on Construction Application of Virtual Reality (CONVR), 156-167, Florence, Italy, https://doi.org/10.36253/979-12-215-0289-3.15
Teizer, J., Hong, K., Larsen, A., Nilsen, M.B. (2023). “Robotic assembly and reuse of modular elements in the supply chain of a learning factory for construction and in the context of circular economy.” 23rd Conference on Construction Application of Virtual Reality (CONVR), 568-577, Florence, Italy, https://doi.org/10.36253/979-12-215-0289-3.55
Speiser, K., Teizer, J. (2023). “An Ontology-Based Data Model to Create Virtual Training Environments for Construction Safety Using BIM and Digital Twins.” 30th European Group for Intelligent Computing in Engineering Conference (EG-ICE), London, Great Britain
Jacobsen, E.L., Teizer, J., Wandahl, S. (2023). “Forecasting construction labor productivity metrics.” International Conference on Computing in Civil Engineering (i3CE), Corvallis, Oregon, USA, 1022–1029, https://doi.org/10.1061/9780784485248.122
Johansen, K.W., Schultz, C., Teizer, J. (2023). “A graph-based approach to minimize redundant spatial computations for automated construction safety prevention through design and planning.” International Conference on Computing in Civil Engineering (i3CE), Corvallis, Oregon, USA, 747–755, https://doi.org/10.1061/9780784485248.090
Jacobsen, E.L., Teizer, J., Wandahl, S. (2023). “Forecasting construction labor productivity metrics.” International Conference on Computing in Civil Engineering (i3CE), Corvallis, Oregon, USA, 1022–1029
Speiser, K., Teizer, J. (2023). “An efficient approach for generating training environments in virtual reality using a digital twin for construction safety.” Proceedings of CIBW099W123, Porto, Portugal, 481-490, ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2 (BEST PAPER AWARD)
Johansen, K.W., Schultz, C., Teizer, J. (2023). “Automated spatiotemporal identification and dissemination of work crews’ exposure to struck-by hazards.” Proceedings of CIBW099W123, Porto, Portugal, 1-10, ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2
Hong, K., Teizer, J. (2023). “A data-driven method for hazard zone identification in construction sites with wearable sensors.” Proceedings of CIBW099W123, Porto, Portugal, 41-48, ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2
Andrade, L.M., Teizer, J. (2023). “Monitoring climate forcers from heavy construction equipment emissions in a digital twin framework.” Proceedings of CIBW099W123, Porto, Portugal, 409-420, ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2
Umeokafor, N., Teizer, J. (2023). “Barriers to digitalisation of construction health, safety, and well-being regulations enforcement and compliance checking.” Proceedings of CIBW099W123, Porto, Portugal, 441-450. ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2
Babazadeh, N., Teizer, J., Bargstädt, H.-J., Melzner, J. (2023). “Digital twin for control of noise emissions from heavy equipment on construction sites.” Proceedings of CIBW099W123, Porto, 211-222, Portugal, ISBN: 978-972-752-309-2, https://doi.org/10.24840/978-972-752-309-2
2022
Andrade, L.M., Teizer, J. (2022). “Web Application for Visualizing Emissions Data from Construction Equipment.” Sustainable and Digital Building (SDB) Conference, Marinha Grande, Portugal, 3-15, https://doi.org/10.1007/978-3-031-25795-7_1
Wolf, M., Teizer, J. (2022). “Serious Game Design Framework to Teach Hazard Awareness and Avoidance on Construction Sites using Pre-defined Hazard Definitions.” 22nd Conference on Construction Application of Virtual Reality (CONVR), Seoul, Korea, 348-358, ISBN: 978-0-9927161-4-1
Golovina, O., Teizer, J. (2022). “Serious game in Virtual Reality for Safe, Active, and Personalized Learning related to Pedestrian Workers Struck By Equipment and other Construction Hazards.” 22nd Conference on Construction Application of Virtual Reality (CONVR), Seoul, Korea, 260-271, ISBN: 978-0-9927161-4-1
Harichandran, A., Teizer, J. (2022). “Automated Recognition of Hand Gestures for Crane Rigging using Data Gloves in Virtual Reality.” 39th International Symposium on Automation and Robotics in Construction (ISARC), Bogota, Columbia, https://doi.org/10.22260/ISARC2022/0043
Alamaro, M., Louis, J., Teizer, J. (2022). “Semiarid Terrain Alteration for Converting Dryland into Arable Land – Construction and Earthmoving Perspectives.” 39th International Symposium on Automation and Robotics in Construction (ISARC), Bogota, Columbia, https://doi.org/10.22260/ISARC2022/0090
Johansen, K.W., Schultz, C., Teizer, J. (2022). “BIM-based Fall Hazard Ontology and Benchmark Model for Comparison of Automated Prevention through Design Approaches in Construction Safety.” 29th European Group for Intelligent Computing in Engineering Conference (EG-ICE), Aarhus, Denmark, 408-417, https://doi.org/10.7146/aul.455.c231
Jacobsen, E., Teizer, J. (2022). “Automating the Estimation of Productivity Metrics for Construction Workers Using Deep Learning and Kinematics.” 29th European Group for Intelligent Computing in Engineering Conference (EG-ICE), Aarhus, Denmark, 418-427, https://doi.org/10.7146/aul.455.c232
Chronopoulos, C., Teizer, J., Esterle, L. (2022). “Trajectory Prediction: A Review of Methods and Challenges in Construction Safety.” 29th European Group for Intelligent Computing in Engineering Conference (EG-ICE), Aarhus, Denmark, 428-438, https://doi.org/10.7146/aul.455.c233
Harichandran, A., Teizer, J. (2022). “A Critical Review on Methods for the Assessment of Trainees’ Performance in Virtual Reality-based Construction Safety Training.” 29th European Group for Intelligent Computing in Engineering Conference (EG-ICE), Aarhus, Denmark, 439-448, https://doi.org/10.7146/aul.455.c234
Teizer, J., Wandahl, S. (2022). “Simplified Emissions Measurement System for Construction Equipment.” Construction Research Congress, Arlington, Virginia, USA, 474-482, https://doi.org/10.1061/9780784483961.050
Jacobsen, E.L., Teizer, J. (2022). “Neural networks in the construction industry: Knowledge gaps and possibilities.” Construction Research Congress, Arlington, Virginia, USA, 1174-1183, https://doi.org/10.1061/9780784483961.123
Teizer, J., Chronopoulos, C. (2022). “Learning Factory for Construction to provide future engineering skills beyond technical education and training.” Construction Research Congress, Arlington, Virginia, USA, 224-233, https://doi.org/10.1061/9780784483985.023
Teizer, J., Johansen, K.W., Schultz, C. (2022). “The Concept of Digital Twin for Construction Safety.” Construction Research Congress, Arlington, Virginia, USA, 1156-1165, https://doi.org/10.1061/9780784483961.121
2021
Bokde, N.D., Johansen, K.W., Wandahl, S., Teizer, J. (2021). “A Digital Twin framework for emissions from construction site operations.” 21st Intl. Conference on Construction Application of Virtual Reality (CONVR), p. 31-42, Middlesbrough, UK
Moelmen, I., Grim, H.L., Jacobsen, E.L., Teizer, J. (2021). “Asymmetrical Multiplayer Serious Game and Vibrotactile Haptic Feedback for Safety in Virtual Reality to Demonstrate Construction Worker Exposure to Overhead Crane Loads.” 38th International Symposium on Automation and Robotics in Construction, Dubai, United Arab Emirates, https://doi.org/10.22260/ISARC2021/0083
Harichandran, A., Johansen, K.W., Jacobsen, E.L., Teizer, J. (2021). “A Conceptual Framework for Construction Safety Training using Dynamic Virtual Reality Games and Digital Twins.” 38th International Symposium on Automation and Robotics in Construction, Dubai, United Arab Emirates, https://doi.org/10.22260/ISARC2021/0084
Johansen, K.W., Pimentel de Figueiredo, R., Golovina, O., Teizer, J. (2021). “Autonomous Safety Barrier Inspection in Construction: An Approach Using Unmanned Aerial Vehicles and SafeBIM.” 38th International Symposium on Automation and Robotics in Construction, Dubai, United Arab Emirates, https://doi.org/10.22260/ISARC2021/0085
Li B., Nielsen R.O., Johansen K.W., Teizer J. , Larsen P.G., Schultz C. (2021). “Towards Digital Twins for Knowledge-Driven Construction Progress and Predictive Safety Analysis on a Construction Site.” In: Margaria T., Steffen B. (eds) Leveraging Applications of Formal Methods, Verification and Validation: Tools and Trends (ISoLA) 2020. Lecture Notes in Computer Science, Vol. 12479. Springer, https://doi.org/10.1007/978-3-030-83723-5_11
Johansen, K.W., Nielsen, R.O., Teizer, J. , Schultz, C. (2021). “An AI-based Approach for Automated Work Progress Estimation from Construction Activities using Abductive Reasoning”. European Conference on Product and Process Modeling 2020-2021, Moscow, Russian Federation, https://doi.org/10.1201/9781003191476-33
Jacobsen, E.L., Strange, N.S., Teizer, J. (2021). “Lean Construction Serious Game using a Multiplayer Virtual Reality Environment.” Proc. 29th Annual Conference of the International Group for Lean Construction (IGLC29), Lima, Peru, 55–64, https://doi.org/10.24928/2021/0160
Jacobsen, E.L., Teizer, J. (2021). “Real-time LiDAR for Monitoring Construction Worker Presence Near Hazards and in Work Areas in a Virtual Reality Environment.” European Group for Intelligent Computing in Engineering Conference (EG-ICE), Berlin, Germany, 2021
2020
Li, B., Schultz, C., Melzner, J., Golovina, O., Teizer, J. (2020). “Safe and Lean Location-based Construction Scheduling”. 37th International Symposium on Automation and Robotics in Construction, Kitakyushu, Japan, October 27-28, 2020, https://doi.org/10.22260/ISARC2020/0195
Solberg, A., Hognestad, J.K., Golovina, O., Teizer, J. (2020). “Active Personalized Training of Construction Safety Using Run Time Data Collection in Virtual Reality.” 20th Intl. Conference on Construction Application of Virtual Reality (CONVR), Middlesbrough, UK, 19-30
Johansen, K.W., Nielsen, R.O., Schultz, C., Teizer, J. (2020). “Non-monotonic Reasoning for Automated Progress Analysis of Construction Operations.” 20th Intl. Conference on Construction Application of Virtual Reality (CONVR), Middlesbrough, UK, 300-311
Li, B., Teizer, J., Schultz, C. (2020). “Non-monotonic Spatial Reasoning for Safety Analysis in Construction.” 21st International Symposium on Principles and Practice of Declarative Programming, Porto, Portugal, October 7-9, 2020, https://doi.org/10.1145/3414080.3414096
Schultz, C., Li, B., Teizer, J. (2020). “Towards a Unifying Domain Model of Construction Safety: SafeConDM.” European Group for Intelligent Computing in Engineering Conference (EG-ICE), Berlin, Germany, July 1-4, 2020, 363-372
Bükrü, S., Wolf, M., Böhm, B., König, M., Teizer, J. (2020). “Augmented Virtuality in Construction Safety Education and Training.” European Group for Intelligent Computing in Engineering Conference (EG-ICE), Berlin, Germany, July 1-4, 2020, p. 115-124
Bükrü, S. Wolf, M., Golovina, O., Teizer, J. (2020), “Using Field of View and Eye Tracking for Feedback Generation in an Augmented Virtuality Safety Training.” Construction Research Congress, Tempe, Arizona, USA, March 8-10, 2020, https://doi.org/10.1061/9780784482872.068
Teizer, J., Embers, S., Golovina, O., Wolf, M. (2020). “A serious gaming approach to integrate BIM, IoT and Lean Construction in Construction Education.” Construction Research Congress, Tempe, Arizona, USA, March 8-10, 2020
Tagliabue, L.C., Ventura, S.M., Teizer, J., Ciribini, A.L.C. (2020). “A Serious Game for Lean Construction Education Enabled by Internet of Things.” 5th Intl. Conference on Smart Learning Ecosystem and Regional Development, Bucharest, Romania, https://doi.org/10.1007/978-981-15-7383-5_19
2019
Golovina, O., Kazanci, C., Teizer, J., König, M. (2019). “Using Serious Games in Virtual Reality for Automated Close Call and Contact Collision Analysis in Construction Safety.” 36th International Symposium on Automation and Robotics in Construction, Banff, Canada, https://doi.org/10.22260/ISARC2019/0129
Wolf, M., Teizer, J., Ruse, J.H. (2019). “Case Study on Mobile Virtual Reality Construction Training.” 36th International Symposium on Automation and Robotics in Construction, Banff, Canada, https://doi.org/10.22260/ISARC2019/0165
2018
Schwabe, K., König, M., Teizer, J. (2018). “Classification of fall hazards for automated detection in building models.” Proceedings of the 17th International Conference on Computing in Civil and Building Engineering (ICCCBE), Tampere, Finland
Neuhausen, M., Teizer, J., König, M. (2018). “Construction Worker Detection and Tracking in Bird’s-Eye View Camera Images.” 35th International Symposium on Automation and Robotics in Construction, Berlin, Germany, 1159-1166, https://doi.org/10.22260/ISARC2018/0161
Golovina, O., Perschewski, M., Teizer, J., König, M. (2018). “Predictive Analytics for Close Calls in Construction Safety.” 35th International Symposium on Automation and Robotics in Construction, Berlin, Germany, https://doi.org/10.22260/ISARC2018/0065
Teizer, J., Weber, J., König, J., Ochner, B., König, M. (2018). “Long Range (LoRa) for Location Tracking and Monitoring of Construction Resources.” 35th International Symposium on Automation and Robotics in Construction, Berlin, Germany, https://doi.org/10.22260/ISARC2018/0001
Golovina, O., Perschewski, M., Teizer, J., König, M. (2018). “Quantitative Analysis of Close Call Events.” EG-ICE 2018, Lausanne, Switzerland, 359-384, https://doi.org/10.1007/978-3-319-91635-4_19
2017
Neges, M., Wolf, M., Propach, M., Teizer, J., Abramovici, M. (2017). “Improving Indoor Location Tracking Quality for Construction and Facility Management.” 34th International Symposium on Automation and Robotics in Construction, Taipei, Taiwan, https://doi.org/10.22260/ISARC2017/0012
Teizer, J., Green, A., Hilfert, T., Perschewski, M., König, M. (2017). “Mobile Point Cloud Assessment for Trench Safety Audits.” 34th International Symposium on Automation and Robotics in Construction, Taipei, Taiwan, https://doi.org/10.22260/ISARC2017/0021
Teizer, J., Wolf, M., Golovina, O., Perschewski, M., Neges, M., König, M. (2017). “Internet of Things (IoT) for Integrating Environmental and Localization Data in Building Information Modeling (BIM).” 34th International Symposium on Automation and Robotics in Construction, Taipei, Taiwan, https://doi.org/10.22260/ISARC2017/0084
Zeng, N., König, M., Teizer, J. (2017). “Off-Site guarding: Look-ahead supply scheduling for risk indication with BIM.” Lean & Computing in Construction Congress (LC3), Heraklion, Greece
Golovina, O., Teizer, J. (2017). “BIM4LIFE: GNSS and BIM data fusion for mapping human-machine interaction.” Lean & Computing in Construction Congress (LC3), Heraklion, Greece, 169-176
Melzner, J., Hanff, J., Teizer, J. (2017). “Pattern-based Generation of 4D-Schedules for Robust Construction Management.” Lean & Computing in Construction Congress (LC3), Heraklion, Greece
von Heyl, J., Teizer, J. (2017). “Lean Production Controlling and Progress Tracking Using Digital Methods.” Proceedings of the 25th Annual Conference of the International Group for Lean Construction, Heraklion, Greece, 127-134. DOI: https://doi.org/10.24928/2017/0238
2016
Hilfert, T., Teizer, J., König, M. (2016). “First Person Virtual Reality for Evaluation and Learning of Construction Site Safety.” 33rd International Symposium on Automation and Robotics in Construction, Auburn, Alabama, USA, https://doi.org/10.22260/ISARC2016/0025
Schwabe, K., König, M., Teizer, J. (2016). “BIM Applications of Rule-based Checking in Construction Site Layout Planning Tasks.” 33rd International Symposium on Automation and Robotics in Construction, Auburn, Alabama, USA, https://doi.org/10.22260/ISARC2016/0026
Teizer, J. (2016). “The Role of Automation in Right-time Construction Safety.” 33rd International Symposium on Automation and Robotics in Construction, Auburn, Alabama, USA, https://doi.org/10.22260/ISARC2016/0024
Teizer, J., Blickle, A., King, T., Leitzbach, O., Guenther, D. (2016). “Large Scale 3D Printing of Complex Geometric Shapes in Construction.” 33rd International Symposium on Automation and Robotics in Construction, Auburn, Alabama, USA, https://doi.org/10.22260/ISARC2016/0114 (BEST PAPER AWARD).
Leifgen, C., Kuhn, T.E., Rüppel, U., Teizer, J. (2016). “BIM-based Collaboration Platform for the Holistic Integration of Energy Active Façade Components.” 16th International Conference on Computing in Civil and Building Engineering (ICCCBE2016), Osaka, Japan
Franz, S., Rüppel, U., Kuhn, T., Teizer, J. (2016). “A Multi-Agent-Based Platform for the Early Integration of Photovoltaic Systems in Building Façades.” 16th International Conference on Computing in Civil and Building Engineering (ICCCBE2016), Osaka, Japan
Schwabe, K., Liedtke, S., König, M., Teizer, J. (2016). “BIM-based Construction Site Layout Planning and Scheduling.” 16th International Conference on Computing in Civil and Building Engineering (ICCCBE2016), Osaka, Japan
2015
Mueller, M., Kuenzel R., Teizer, J., Blickle, A. (2015). “SmartSite: Intelligent And Autonomous Environments, Machinery, And Processes To Realize Smart Road Construction Projects.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland, https://doi.org/10.22260/ISARC2015/0068
Rinneberg, S., Teizer, J., Kessler, S., Günthner, W.A. (2015). “Smart Quick Coupling System for Safe Equipment Attachment Selection and Operation.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland, https://doi.org/10.22260/ISARC2015/0087
Teizer, J., Golovina, O., Wang, D., Pradhananga, N. (2015). “Automated Collection, Identification, Localization, and Analysis of Worker-Related Proximity Hazard Events in Heavy Construction Equipment Operation.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland, https://doi.org/10.22260/ISARC2015/0005
Zhang, S., Teizer, J., Pradhananga, N. (2015). “Global Positioning System Data To Model And Visualize Workspace Density In Construction Safety Planning.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland, https://doi.org/10.22260/ISARC2015/0041
Teizer, J. (2015). “Magnetic Field Worker Proximity Detection And Alert Technology For Safe Heavy Construction Equipment Operation.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland https://doi.org/10.22260/ISARC2015/0062
Teizer, J. (2015). “Safety 360: Surround-View Sensing to Comply with Changes to the ISO 5006 Earth-Moving Machinery – Operator’s Field of View – Test Method and Performance Criteria.” Proceedings of the 32nd International Symposium on Automation and Robotics in Construction, Oulu, Finland, https://doi.org/10.22260/ISARC2015/0105
2014
Bügler, M., Ogunmakin, G., Teizer, J., Vela, P.A., Borrmann, A. (2014). “A Comprehensive Methodology for Vision-Based Progress and Activity Estimation of Excavation Processes for Productivity Assessment.” European Group for Intelligent Computing in Engineering (EG-ICE) Conference, Cardiff, Wales, July 16-18, 2014
Costin, A.M., Felkl, J., Golovina, O., Teizer, J. (2014). “Roadmap to Guide Construction Safety Research Commercialization.” Proceedings of the 31th International Symposium on Automation and Robotics in Construction, Sydney, Australia, July 9-11, 2014, 646-653, https://doi.org/10.22260/ISARC2014/0086
Collins, R., Zhang, S., Kim, K., Teizer, J. (2014). “Integration of Safety Rick Factors in BIM for Scaffolding Construction.” ICCCBE Conference, Orlando, Florida, June 2014, 307-314, https://doi.org/10.1061/9780784413616.039
Costin, A., Teizer, J. (2014). “Utilizing BIM for Real-time Visualization and Indoor Localization of Resources.” International Conference on Computing in Civil and Building Engineering Conference, Orlando, Florida, June 2014, 649-656, https://doi.org/10.1061/9780784413616.081
Fang, Y., Teizer, J. (2014). “A Multi-user Virtual 3D Training Environment to Advance Collaboration Among Crane Operator and Ground Personnel in Blind Lifts.” International Conference on Computing in Civil and Building Engineering Conference, Orlando, Florida, June 2014, 2071-2078, https://doi.org/10.1061/9780784413616.257
Pradhananga, N., Teizer, J. (2014). “Congestion Analysis for Construction Site Layout Planning using Real-time Data and Cell-based Simulation Model.” International Conference on Computing in Civil and Building Engineering Conference, Orlando, Florida, June 2014, 681-688 https://doi.org/10.1061/9780784413616.085
Wang, J., Pradhananga, N., Teizer, J. (2014). “Automated Fall Risk Identification using Point Cloud Data in Construction Excavation.” International Conference on Computing in Civil and Building Engineering Conference, Orlando, Florida, June 2014, 981-988, https://doi.org/10.1061/9780784413616.122
Zhang, S., Boukamp, F., Teizer, J. (2014). “Ontology-Based Semantic Modeling of Safety Management Knowledge.” International Conference on Computing in Civil and Building Engineering Conference, Orlando, Florida, June 2014, 2254-2262, https://doi.org/10.1061/9780784413616.280
Marks, E., Teizer, J., Hinze, J. (2014). “Near Miss Reporting Program to Enhance Construction Worker Safety Performance.” 2014 Construction Research Congress, Atlanta, Georgia, May 19-21, 2014, https://doi.org/10.1061/9780784413517.235
Pradhananga, N., Teizer, J. (2014). “Development of a Cell-based Simulation Model for Earthmoving Operation using Real-time Location Data.” 2014 Construction Research Congress, Atlanta, Georgia, May 19-21, 2014, https://doi.org/10.1061/9780784413517.020
Wang, J., Teizer J., Pradhananga, N. (2014). “Automate Cave-in Safety Risk Identification in Construction Excavation.” 2014 Construction Research Congress, Atlanta, Georgia, May 19-21, 2014, https://doi.org/10.1061/9780784413517.014
Fang, Y., Teizer, J., Marks, E. (2014). “A Framework for Developing an As-built Virtual Environment to Advance Training of Crane Operators.” 2014 Construction Research Congress, Atlanta, Georgia, May 19-21, 2014, https://doi.org/10.1061/9780784413517.004
Costin, A., Pradhananga. N., Teizer, J. (2014). “Passive RFID and BIM for Real-Time Visualization and Location Tracking.” 2014 Construction Research Congress, Atlanta, Georgia, May 19-21, 2014, 169-178, https://doi.org/10.1061/9780784413517.018
Stowe, K., Zhang, S., Jaselskis, E.J, Teizer, J. (2014). “Capturing the ROI of “All-in” BIM: A Structured Approach.” Construction Engineering Conference, Seattle, 2014
2013
Zhang, S., Teizer, J. (2013). “Automated Safety-in-Design Rule-Checking for Capital Facility Projects.” 13th International Conference on Construction Applications of Virtual Reality, London, October 30-31, 2013
Costin, A.M., Shaak, A., Teizer, J., Pfeffer, G., Khanzode, A., Saripally, D., Chao, O., Schoner, B., Shah, S. (2013). “Passive RFID-Based Asset Tracking and Project Management on a Large Hospital Project.” 13th International Conference on Construction Applications of Virtual Reality, London, October 30-31, 2013, 209-218
Pradhananga, N., Teizer, J. (2013). “Construction Site Population Density Analysis using GPS Technology for Automated Safety and Productivity Assessment in Earth-Moving Operations.“ 13th International Conference on Construction Applications of Virtual Reality, London, October 30-31, 2013
Ray, S.J., Teizer, J., Bostelman, R., Agronin, M., Albanese, D. (2013). “Improved Methods for Evaluation of Visibility for Industrial Vehicles Towards Safety Standards.” Proceedings of the 30th International Symposium on Automation and Robotics in Construction, Montreal, Canada, August 11-15, 2013, https://doi.org/10.22260/ISARC2013/0112
Siebert, S., Teizer, J. (2013). „Mobile 3D mapping for surveying earthwork using an unmanned aerial vehicle (UAV).” Proceedings of the 30th International Symposium on Automation and Robotics in Construction, Montreal, Canada, August 11-15, 2013, https://doi.org/10.22260/ISARC2013/0154
Cheng, T., Pradhananga , N., Teizer, J. (2013). “Automated Evaluation of Proximity Hazards Caused By Workers Interacting With Equipment.” Proceedings of the 30th International Symposium on Automation and Robotics in Construction, Montreal, Canada, August 11-15, 2013, https://doi.org/10.22260/ISARC2013/0114
Marks, E., Wetherford, J., Teizer, J., Nobuyoshi, N. (2013). “Potential of Leading Indicator Data Collection and Analysis for Proximity Detection and Alert Technology in Construction.” Proceedings of the 30th International Symposium on Automation and Robotics in Construction, Montreal, Canada, August 11-15, 2013, https://doi.org/10.22260/ISARC2013/0113
Ogunmakin, G. Teizer, J., Vela P.A. (2013). “Quantifying Interactions Amongst Construction Site Machines.” European Group for Intelligent Computing in Engineering (EG-ICE) Conference, Vienna, Austria July 1-3, 2013
Marks, E., Teizer J. (2013). Evaluation of the Position and Orientation of (Semi-) Passive RFID Tags for the Potential Application in Ground Worker Proximity Detection and Alert Devices in Safer Construction Equipment Operation.” 2013 ASCE International Workshop on Computing in Civil Engineering, Los Angeles, California, June 23-25, 2013, https://doi.org/10.1061/9780784413029.081
Cheng, T., Teizer, J., Migliaccio, G.C., Gatti, U.C. (2013). “Automating the Task-level Construction Activity Analysis through Fusion of Real Time Location Sensors and Worker’s Thoracic Posture Data.” 2013 ASCE International Workshop on Computing in Civil Engineering, Los Angeles, California, June 23-25, 2013, https://doi.org/10.1061/9780784413029.079
Costin, A.M., Shaak, A., Teizer, J. (2013). “Development of a Navigational Algorithm in BIM for Effective Utility Maintenance Management of Facilities Equipped with Passive RFID.” 2013 ASCE International Workshop on Computing in Civil Engineering, Los Angeles, California, June 23-25, 2013, 653-660, https://doi.org/10.1061/9780784413029.082
Migliaccio, G.C., Cheng, T., Gatti, U.C., Teizer, J. (2013). “Data Fusion of Real-time Location Sensing (RTLS) and Physiological Status Monitoring (PSM) for Ergonomics Analysis of Construction Workers.” CIB World Congress, Brisbane, Australia, May 5-9, 2013
Marks, E.D., Teizer, J. (2013). “Personal Protective Unit Position and Orientation of Proximity Detection and Alert Technology for Heavy Construction Equipment Operation.” CIB World Congress, Brisbane, Australia, May 5-9, 2013
Sulankivi, K., Zhang, S., Teizer, J., Eastman, C.M. Kiviniemi, M., Romo, I., Granholm, L. (2013). “Utilization of BIM-based Automated Safety Checking in Construction Planning.” CIB World Congress, Brisbane, Australia, May 5-9, 2013
Kim, K., Teizer, J. (2013). “BIM-based Planning of Temporary Facilities for Concrete Construction.” Fifth International Conference on Construction Engineering and Project Management (ICCEPM), Anaheim, California, January 9-11, 2013
2012
Pradhanaga, N., Teizer, J. (2012). “GPS-based Framework towards more Realistic and Real-time Construction Equipment Operation Simulation.” Winter Simulation Conference, Berlin, Germany, December 9-12, 2012, https://doi.org/10.1109/WSC.2012.6465159
Zhang, S., Teizer, J., Boukamp, F. (2012). “Automated Jobsite Hazard Analysis (JHA) using Safety Ontologies in Building Information Models (BIM).” Symposium on Civil Engineering Informatics, Committee on Civil Engineering Informatics of Japan Society of Civil Engineers (JSCE), Yotsuya, Tokyo, September 25-26, 2012
Sulankivi, K., Teizer J., Kiviniemi, M., Eastman, C.M., Zhang, S., Kim, K. (2012). “Framework for Integrating Safety into Building Information Modeling.” Proceedings of CIB W099, Singapore, September 10-11, 2012, 93-100
Zhang, S., Teizer, J., Boukamp, F. (2012). “Automated Ontology-based Job Hazard Analysis (JHA) in Building Information Models (BIM).” Proceedings of CIB W099, Singapore, September 10-11, 2012, 74-81
Costin, A., Pradhananga, N., Teizer, J. (2012). “Real-time Resource Location Tracking in Building Information Models (BIM).” 9th International Conference on Cooperative Design, Visualization and Engineering (CDVE), Osaka, Japan, September 2-5, 2012, Springer, LNCS 7467, Yuhua Luo (Ed.), 41-48
Venugopal, M., Eastman, C.M., Teizer, J. (2012). ”Formal Specification of the IFC Concept Structure for Precast Model Exchanges.” 2012 ASCE International Workshop on Computing in Civil Engineering, Clearwater Beach, Florida, June 17-20, 2012, 1114-1124, https://doi.org/10.1061/9780784412343.0027
Costin, A., Pradhananga, N.,Teizer, J. (2012). “Integration of Passive RFID Location Tracking in Building Information Models (BIM).” European Group for Intelligent Computing in Engineering (EG-ICE) Conference, Herrsching, Germany, July 4-6, 2012
Ray, S.J., Teizer, J. (2012). “Real-Time Posture Analysis of Construction Workers for Ergonomics Training.” Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012, 1001-1010, https://doi.org/10.1061/9780784412329.101
Zhang, S., Lee, J.K., Venugopal, M., Teizer, J., Eastman, C.M. (2012). “A Framework for Automatic Safety Checking of Building Information Models.” Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012, 574-581, https://doi.org/10.1061/9780784412329.058
Marks, E., Teizer, J. (2012). “Proximity Sensing and Warning Technology for Heavy Construction Equipment Operation.” Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012, 981-990, https://doi.org/10.1061/9780784412329.099
Pradhananga, N., Teizer, J. (2012). “Spatio-Temporal Safety Analysis of Construction Site Operations using GPS Data.” Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012, 787-798, https://doi.org/10.1061/9780784412329.080
Migliaccio, G.C., Teizer, J., Cheng, T., Gatti, U.C. (2012). “Automatic Identification of Unsafe Bending Behavior of Construction Workers Using Real-Time Location Sensing and Physiological Status Monitoring.” Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012, 633-642, https://doi.org/10.1061/9780784412329.064
Marks, E., Cheng, T., Teizer, J. (2012). “Evaluation of Construction Equipment Design on Operator Visibility.” Proceedings of the Transportation Research Board, Washington D.C.
2011
Cheng, T., Teizer, J. (2011). “3D Immersive Data Visualization Technology for Real-time Construction Applications.” Information Technologies in Safety Management (ITSM) of Large Scale Infrastructure Projects, November 21-23, Wuhan, China
Cheng, T., Teizer, J. (2011). “Real-time 3D Immersive Visualization Technology for Construction Resource Planning and Monitoring.” International Conference on Construction Applications of Virtual Reality 2011, Weimar, Germany, November 3-4, 2011, 87-89
Venugopal, M., Eastman, C., Sacks, R., Teizer, J. (2011). “Improving Robustness of Model Exchanges Using Product Modeling “Concepts” for IFC Schema.” Proceedings of the 2011 ASCE International Workshop on Computing in Civil Engineering, Miami, Florida, June 19-22, 2011, 611-618, https://doi.org/10.1061/41182(416)75
Yang, P. Vela, P.A., Teizer, J., Shi, Z.K. (2011). “Vision-Based Crane Tracking for Understanding Construction Activity.” Proceedings of the 2011 ASCE International Workshop on Computing in Civil Engineering, Miami, Florida, June 19-22, 2011, 258-265, https://doi.org/10.1061/(ASCE)CP.1943-5487.0000242
Cheng, T., Teizer, J. (2011). “Real-time Automated Construction Worker Location Tracking for Spatio-Temporal Safety Analysis and Feedback.” Proceedings of CIB W099, Washington D.C., August 24-26, 2011
Teizer, J., Reynolds, M.S. (2011). “Towards a Fully Automated Equipment Blind Spot Detection, Equipment Operator Visibility Monitoring, and Ground Personnel Proximity Warning and Alert System.” Proceedings of CIB W099, Washington D.C., August 24-26, 2011
Zhang, S., Lee, J.K., Venugopal, M., Teizer, J., Eastman, C. (2011). “Integrating BIM and Safety: An Automated Rule-Based Checking System for Safety Planning and Simulation.” Proceedings of CIB W099, Washington D.C., August 24-26, 2011
Migliaccio, G., Gatti U., Teizer, J. (2011). “Remote Construction Worker Location Activity and Safety Monitoring.” Proceedings of the 28th International Symposium on Automation and Robotics in Construction, Seoul, Korea, June 29-July 2, 2011, https://doi.org/10.22260/ISARC2011/0121
Ray, S.J.. Teizer J. (2011). “Automated Head Pose Estimation of Vehicle Operators.” Proceedings of the 28th International Symposium on Automation and Robotics in Construction, Seoul, Korea, June 29-July 2, 2011, https://doi.org/10.22260/ISARC2011/0163
Cheng, T., Teizer, J. (2011). “Crane Operator Visibility of Ground Operations.” Proceedings of the 28th International Symposium on Automation and Robotics in Construction, Seoul, Korea, June 29-July 2, 2011 https://doi.org/10.22260/ISARC2011/0131
Stewart, M., Teizer, J., Reynolds, M. (2011). “SmartHat: A Battery-free Worker Safety Device Employing Passive UHF RFID Technology.” RFID 2011, Orlando, Florida, https://doi.org/10.1109/RFID.2011.5764606
Vetri, V.V., Wood, N., Teizer, J., Guensler, R. (2011). “Heavy Duty Diesel Vehicle Modal Emissions Model Estimates Using GPS Data.” 13th TRB Transportation Planning Applications Conference, Reno, Nevada
2010
Costin, A., Sedehi, A., Williams, M., Li, L., Bailey, K., Teizer, J. (2010). “Leveraging Passive Radio Frequency Identification Technology in High-Rise Renovation Projects.” Proceeding of the 27th International Conference – Applications of IT in the AEC Industry, Cairo, Egypt, November 16-18, 2010
Cheng, T., Yang, J., Teizer, J, Vela, P.A. (2010). “Automated Construction Resource Location Tracking to Support the Analysis of Lean Principles.” 18th Annual Conference of the International Group for Lean Construction, Haifa, Israel, July 14-16, 2010, 643-653
Arif, O., Marshall, M., Daley, W., Vela, P.A., Teizer, J., Ray, S.J., Stewart, S. (2010). “Tracking and Classifying Objects on a Conveyor Belt Using Time-of-Flight Camera”, Proceedings of the 27th International Symposium on Automation and Robotics in Construction, Bratislava, Slovakia, June 25-27, 2010, https://doi.org/10.22260/ISARC2010/0022
Thomas, T., Reynolds, M., Teizer, J. (2010). “Electromagnetic Energy Harvesting for Sensing, Communication, and Actuation.” Proceedings of the 27th International Symposium on Automation and Robotics in Construction, Bratislava, Slovakia, June 25-27, 2010, https://doi.org/10.22260/ISARC2010/0020
Arif, O., Daley, W., Vela, P.A., Teizer, J., Stewart, J. (2010). “Visual Tracking and Segmentation Using Time-Of-Flight Sensor.” IEEE International Conference on Image Processing (ICIP), Hong Kong, Special Administrative Region of the People’s Republic of China, September 26-29, 2010, 2241-2244, https://doi.org/10.1109/ICIP.2010.5652979
Hallowell, M.R., Teizer, J., Blaney, W. (2010). “Framework for Integration of Sensing Technology with Traditional Safety Management Strategies.” Proceedings of the Construction Research Congress, Banff, Canada, May 8-11, 2010, 31-40, https://doi.org/10.1061/41109(373)4.
Allread, B., Teizer, J. (2010). “Blind Spot Measurements for Real-time Pro-Active Safety in Construction.” Proceedings of the Construction Research Congress, Banff, Canada, May 8-11, 2010, 132-141, https://doi.org/10.1061/41109(373)14 (BEST PAPER AWARD).
Artenian, A., Sadeghpour, F., Teizer, J. (2010). “Using a GIS Framework for Reducing GHG Emissions in Concrete Transportation.” Proceedings of the Construction Research Congress, Banff, Canada, May 8-11, 2010,1557-1566, https://doi.org/10.1061/41109(373)156
Venugopal, M., Cheng, T., Teizer, J. (2010). “Real-time Spatial Location Tracking of Construction Resources in Lay Down Yards.” Proceedings of the Construction Research Congress, Banff, Canada, May 8-11, 2010, 112-121, https://doi.org/10.1061/41109(373)12
Cheng, T., Teizer, J. (2010). “Real-time Data Collection and Visualization Technology in Construction.” Proceedings of the Construction Research Congress, Banff, Canada, May 8-11, 2010, 339-348, https://doi.org/10.1061/41109(373)34
Ndiour, I., Arif, O., Vela, P.A., Teizer, J. (2010). “A Probabilistic Contour Observer for Visual Tracking.” IEEE American Control Conference, Baltimore, MD, 4558-4563, https://doi.org/10.1109/ACC.2010.5530871
Cheng, T., Venugopal, M., Yang, J., Teizer, J., Vela, P.A. (2010). “Leveraging Technology for Productivity, Safety, and Security Monitoring and Control.” The Second International Conference on Engineering Systems Management and Applications, Solutions for Regional and Global Challenges, March 30 – April 1, American University of Sharjah, United Arab Emirates, 73-80
2009
Vela, P.A., Yang, J., Arif, O., Teizer, J., Shi, Z. (2009). “Visual Monitoring of Airport Ground Operations.” IEEE/AIAA 28th Digital Avionics Systems Conference, 1-3, 1000-1007, https://doi.org/10.1109/DASC.2009.5347487
Ndiour, I., Arif, O., Teizer, J., Vela, P., (2009). “A Probabilistic Shape Filter for Online Contour Tracking.” Proceedings of the IEEE International Conference on Image Processing, 1-6, 433–436, https://doi.org/10.1109/ICIP.2009.5414413
Venugopal, M., Cheng, T., Allread, B., Fullerton, C., Teizer, J., Reynolds, M.S., Hinze, J. (2009) “Using Technology to Warn Construction Workers of Danger.” CIB W099 Conference 2009, Melbourne, Australia, October 21-23, 2009
Ndiour, I., Arif, O., Teizer, J., Vela, P.A. (2009). “A Probabilistic Contour Observer for Visual Tracking.” IEEE Control Systems Society Conference Management System, 48th IEEE Conference on Decision and Control, Shanghai, P.R. China, https://doi.org/10.1109/ACC.2010.5530871
Yang, J., Vela, P.A., Shi, Z., Teizer, J. (2009). “Probabilistic Multiple People Tracking through Complex Situations.” Proceedings of the 11th IEEE International Workshop on PETS, Miami, June 25, 2009, 79-86
Cheng, T., Teizer J., Faschingbauer, G. (2009). “Advanced Real-time Monitoring Models for Temporary Structures in Construction.” Proceedings of the ASCE International Workshop on Computing in Civil Engineering, Austin, Texas, June 25, 2009, 33-42, https://doi.org/10.1061/41052(346)4
Gonsalves, R., Teizer J. (2009). “Human Motion Analysis Using 3D Range Imaging Technology.” Proceedings of the 26th International Symposium on Automation and Robotics in Construction, Austin, Texas, June 25, 2009, 76-85, https://doi.org/10.22260/ISARC2009/0044
Sadeghpour, F., Teizer, J. (2009). “Modeling Space Requirements for Safe Operation of Construction Equipment Using Laser Scanners.” Fifth International Conference on Construction in the 21st Century, Istanbul, Turkey, 740-747
Fullerton, C.E., Allread, B.S., Teizer, J. (2009). “Pro-Active Real-time Personnel Warning System.” Proceedings of the Construction Research Congress, Seattle, Washington, April 5-7, 2009, 31-40, https://doi.org/10.1061/41020(339)4
Bohn, J.S., Teizer, J. (2009). “Cost-Benefit Analysis for Hi-Resolution Cameras in Construction.” Proceedings of the Construction Research Congress, Seattle, Washington, April 5-7, 2009, 21-30, https://doi.org/10.1061/(ASCE)CO.1943-7862.0000164
Venugopal, M., Teizer, J., Teizer W. (2009). “Nanotechnology: Benefits, Barriers, and Impact on Construction.” Proceedings of the Construction Research Congress, Seattle, Washington, April 5-7, 2009, 447-456, https://doi.org/10.1061/41020(339)46
Bohn, J.S., Teizer, J. (2009). “Construction Project Monitoring using Hi-Resolution Automated Cameras.” Proceedings of the 88th Annual Meeting of the Transportation Research Board, Washington D.C., January 11-15, 2009
2008
Walia, A., Teizer, J. (2008). “Analysis of Spatial Data Structures for Proximity Detection.” Proceedings of ICCCBE-XII & INCITE, Tsinghua University Press & Springer, Beijing, China, October 16, 2008, https://doi.org/10.1016/S1007-0214(08)70134-2
Teizer, J., Vela, P. (2008). “Workforce Detection and Tracking on Construction Sites using Video Cameras.” European Group for Intelligent Computing in Engineering 2008 Conference, Plymouth, Great Britain, July 2-4, 2008, 470-478
Teizer, J., Mantripragada, U., Venugopal, M., Walia, A. (2008). “Analyzing the Travel Pattern of Construction Workers.” Proceedings of the 25th International Symposium on Automation and Robotics in Construction, Vilnius, Lithuania, June 27-29, 2008, 391-396, https://doi.org/10.22260/ISARC2008/0025
Venugopal, M., Teizer, J. (2008). “Emerging Pro-Active Work Zone Safety Technologies in Construction.” Proceedings of CIB W99 International Conference, 14th Rinker International Conference on Evolution of and Directions in Construction Safety and Health, Gainesville, Florida, March 9-11, 2008, 363-375
2007
Teizer, J., Lao, D., Sofer, M. (2007). “Rapid Automated Monitoring of Construction Site Activities using Ultra-Wideband.” Proceedings of the 24th International Symposium on Automation and Robotics in Construction, Cochin, Kerala, India, September 19-21, 2007, 23-28, https://doi.org/10.22260/ISARC2007/0008 (BEST PAPER AWARD).
Teizer, J. (2007). “Automated Monitoring of Construction Processes for Management Decision Making.” Royal Institution of Chartered Surveyors, Proceedings of the Annual Construction and Building Research Conference, Atlanta, Georgia, September 6-7, 2007, 145-155
Teizer, J., Castro-Lacouture, D. (2007). “Combined Ultra Wideband Positioning System and 3D Range Imaging for Productivity and Safety Improvement in Building Construction.” Proceedings of the ASCE International Workshop on Computing in Civil Engineering, Pittsburgh, Pennsylvania, July 25-28, 2007
Teizer, J. (2007). “Rapid Surveillance of Trenches for Safety.” Proceedings of the Construction Research Congress, Freeport, Bahamas, May 6-8, 2007
Vogt, B., Teizer, J. (2007). “Sparse Laser Scanning to Improve Off-Shore Pipe-Fitting Productivity.” Proceedings of the Construction Research Congress, Freeport, Bahamas, May 6-8, 2007
2006
Teizer, J., Haas, C.T., Caldas, C.H., Bosche, F. (2006), “Applications for Real-Time 3D Modeling in Transportation Construction.” 9th International Conference on Applications of Advanced Technology in Transportation, Chicago, Illinois, 123-128
Caldas C.H., Chi, S., Teizer, J., Gong, J. (2006). “Intelligent Computing and Sensing for Active Safety on Construction Sites.” EG-ICE Workshop, Monte Verità, Ascona, Switzerland, June 25-30, 2006, https://doi.org/10.1007/11888598_11
Teizer, J., Bosche, F., Caldas, C.H., Haas, C.T., (2006), “Real-time Spatial Detection and Tracking of Resources in a Construction Environment.” International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, 494-502
Bosche, F., Teizer, J., Haas, C.T., Caldas, C.H. (2006), “Combining A Priori CAD Knowledge with Laser Range Scanning Information in Real-time.” International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, 37-46
2005
Teizer, J., Kim, C., Bosche, F., Caldas, C.H., Haas, C.T., (2005), “Real-time 3D Modeling for Accelerated and Safer Construction using Emerging Technology.” Proceedings of the 1st International Conference on Construction Engineering and Management, Seoul, South Korea, 539-543
Teizer, J., Bosche, F., Haas, C.T., Caldas, C.H. (2005), “Real-time, 3D Object Detection and Modeling in Construction.” Proceedings of the 22nd International Symposium on Automation and Robotics in Construction, Ferrara, Italy, 49-53, https://doi.org/10.22260/ISARC2005/0026
Teizer, J., Liapi, K.A., Caldas, C.H., Haas, C.T. (2005), “Experiments in Real-time Spatial Data Acquisition for Obstacle Detection.” Proceedings of the Construction Research Congress, San Diego, California, 547-551, https://doi.org/10.1061/40754(183)107
2004
Kim C., Haas, C.T., Liapi, K.A., McLaughlin, J., Teizer, J., Bosche, F. (2004), “Rapid Human-Assisted, Obstacle Avoidance System using Sparse Range Point.” Proceedings of the 9th Biennial ASCE Aerospace Division International Conference on Engineering, Construction, and Operations in Challenging Environments, League City/Houston, Texas, 115-122, https://doi.org/10.1061/40722(153)17